Void Bias V3

Void Bias V3 is offered in excellent condition at €1,000 per unit. Available stock: 8 units. The quantity is the available inventory count; the price applies to one unit.

Void Bias V3: load-dependent amplifier output

The Void Bias V3 is the amplifier model named in this stock. The manufacturer’s shared V3/V9 guide gives V3 maximum output per channel as 1,400 W at 8 Ω, 2,600 W at 4 Ω and 2,800 W at 2 Ω. These figures describe different load conditions and should be kept together when comparing the amplifier with a proposed loudspeaker system.

The V3 is distinct from the V9, even though the two appear in the same manual. Their output figures are not interchangeable. Use the V3 specification when assessing power requirements or comparing stock with an existing amplifier inventory.

Options must be checked, not assumed

Void’s manual describes optional DSP and AESOP boards. Unlike the separately listed V9 DSP + AESOP inventory item, the supplied V3 name does not state either option. This listing therefore does not promise DSP, AESOP, digital networking or any associated optional hardware.

For system planning, confirm the exact physical configuration and the required load against the manufacturer’s documents. Signal routing, processing and control arrangements should be chosen for the equipment actually fitted. The available quantity is the number of individual units in stock, and the price applies to each unit. The seller describes their condition as excellent; that statement does not establish a bench-test report, replacement history, cabling package or transport equipment.

Assessing a V3 within a power plan

The V3’s output ratings should be compared on the same impedance basis as any alternative amplifier. Channel count, intended loudspeaker load and routing all influence the practical choice. A high figure at one load should not be quoted without its condition or substituted for a different model’s specification.

The shared V3/V9 manual is useful because it sets out both models and optional configurations in one place. It also makes careful reading important: a function described for a fitted option is not automatically present in every unit. The V3 title here does not identify DSP or AESOP, so those decisions remain tied to the physical configuration rather than an assumption about the product family.

Documentation and related equipment

Void official product documentation · Explore amplifiers & controllers at Bsound Pro Audio